Audac APG20MK2 Active audio transceiver

Audac APG20MK2 aktiivne helisignaali konverter

Audac APG20MK2 on helisignaali konverter, mis pakub kompaktset lahendust helisignaalide konvertimiseks klassi- ja presentatsiooniruumides, kontorites või erinevates audiovisuaal installatsioonides. Aktiivne konverter võimaldab vastuvõtta ja konvertida databus helisignaale standardseteks liini/mikrofoni helisignaalideks ning on mugavalt kasutatav nii desktop seades, kui 19" racki paigaldatuna (racki kinnitusklambrid müügil eraldi). Audac APG20MK2 on hõlpsasti ühendatav helivõimendi või helimikserpuldiga.

Active audio transceivers RCA

The APG20MK2 is an audio receiver gateway converting databus transmitted audio signals to standard line and microphone level signals. The audio output of the APG20 can be fed to regular inputs on audio amplifiers, pre-amplifiers, mixers or many more. In combination with the matching input modules (WLI and WMI) it offers a solution for two channel audio transmission (line & microphone) covering distances up to 300 meters over standard UTP CAT5E (or better) cabling. Distances up to 600 meters can be achieved when applying additional power supplies. Due to the differential bus input with increased voltage levels, the received signals are insensitive for noise, interference and attenuation over the long transmission distance. 

This offers the appropriate solution for high quality audio transmissions in long distance applications while maintaining high quality audio reproduction. The bus input carrying both audio channels, an RS-485 data channel and 24 Volts distribution to the transmitter end is implemented using an RJ45 connector. The audio outputs are performed using dual RCA (line) and female XLR (microphone) connections. The XLR output is accompanied with a switch allowing selection between a -40 dB and 0 dB output level. The signals carried on the RS-485 pair of the databus are linked to an RJ45 output connection, allowing daisy chaining to the controlled equipment. A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.

Spetsifikatsioonid:

Inputs

• Type: Audio / RS-485 / 24V DC Bus
  
• Connector: RJ45
  

Outputs

• Microphone Type: 1 x Microphone outputs (Level switchable 0 dB ~ -40 dB)
  
• Connector: XLR male
  
• Line Type: 1 x Line output
  
• Connector: Dual RCA
  
• Data link Type: 1 x RS-485 data link outputs
  
• Connector: RJ45

Power

• Consumption: 0.8 W (PSD241 included)
  
• Supply: 24V DC (PSD241 switching Power supply included 100 ~ 240V AC / 47 ~ 63 Hz)
  
• Max. cable length: Without external PSU 300 m; With external PSU 600 m
  
• Connection standard: TIA/EIA T568B
  
• Cabling: UTP CAT5E (or better)

• Mõõtmed: 108 x 44 x 165 mm
  
• Kaal: 0.760 kg
  
• Värvus: Must
  
• Konstruktsioon: Alumiinium
  

Pakend sisaldab:

• Audac APG20MK2 aktiivne helisignaali konverter 1 tk
  
• 24V toitekaabel 1 tk