ENTTEC Open DMX Ethernet (ODE) With Poe MK2

Power Over Ethernet DMX interface – more powerful than ever

The ODE Mk2 PoE is a solid-state single universe RDM compatible DMX node featuring PoE (802.3af) designed for the highest level of portability, simplicity and practicality. A perfect solution for converting from a multitude of ethernet based lighting protocols to physical DMX and vice versa without the need for adaptors. The ODE Mk2 PoE features the same modern and intuitive web-based configuration found in our premium products including, diagnostics, either LTP or HTP Merging (with up to 2 sources) and RDM support. All in the form factor of a portable single universe node. The ODE Mk2 PoE’s four LED indicators can be used to visually check the status of your ODE MK2 PoE without the need to access the web interface. Use the ODE Mk2 PoE in conjunction with a wireless router to give a buffered DMX output from any sACN / ArtNet compatible iOS or Android application.

Enjoy trusted industry standard performance at a budget-friendly price point. In addition, the ODE Mk2 PoE is available without a PoE option or in a DIN-rail form factor to ensure the best flexibility.

And for even greater flexibility, truss mount your ODE using the ODE Truss mount kit.

Features

Easy web page configuration

• Web-based configuration. Use your favorite browser, and click a few buttons and you are done.

Multiple protocols support

• Supports Art-Net 1/2/3, Streaming ACN sACN, and ESP. Use whichever you prefer, simply change the protocol using the web configuration.

Ready to connect

• ODE POE MK2 is factory set to use DHCP IP addressing. Simply connect to your existing router, and any supported software will find it.
  

Flexible options

• Supports either LTP or HTP Merging (upto 2 sources). Either enable or disable merging, to suit your needs.

RDM over Art-Net

Supports RDM Over Art-Net (controller). When enabled, all RDM fixtures connected to the ODE, can be configured using any RDM over Art-net software.

Input or Output

• Choose from Input mode (receives DMX, and sends over Ethernet), or Output mode (sends DMX). Input mode supports options for broadcast or unicast.

Spetsifikatsioonid:

• Input Voltage: 7V - 12V DC
  
• Nominal Current: 800 mA
  
• Wattage: 5.6W
  
• Supported Protocols: DMX512A / RDM / ArtNet / sACN / ESP
  
• Width: 130mm / 5.12”
  
• Height: 40mm / 1.58”
  
• Depth: 60mm / 2.36”
  
• Weight: 0.26 kg / 0.58 lbs
  
• Shipped Weight: 0.48 kg / 0.68 lbs
  
• Operating  Environment: 0° to 50°C
  

Connectors

• 1x RJ45 Ethercon Connection
  
• 1x Male DMX XLR 5pin
  
• 1x Female DMX XLR 5pin
  
• 1x DC Jack
  

• Enttec ODE POE MK2 DMX lides 1 tk
  
• Ethernet kaabel 1 tk